New performance products from Riva Racing

Power up your Sea-Doo and Yamaha watercraft

RIVA Racing, the biggest aftermarket manufacturer in the PWC industry, has recently introduced a host of new products to its lineup that will add power and performance to your Sea-Doo and Yamaha watercraft.

Sea-Doo XXX Charger

Riva Racing calls this the ultimate performance supercharger for Sea-Doo 215/255/260 engines. The all new RIVA XXX-Charger is a complete supercharger assembly featuring a sophisticated, lightweight 140mm Vortech impeller that is precision balanced to deliver smooth operation, a billet spacer, machined front & rear housings and RIVA Heavy Duty Clutch Washers. Increased interior volume produces huge performance gains delivering 15.5psi @ 8,500rpm.

Each XXX-Charger is hand assembled in-house using Genuine BRP shaft, bearings & hardware. Installs quickly in place of OEM supercharger. Requires RIVA Pro-Series ECU, RIVA Pro-Series Fuel Injectors (50lb) & RIVA Fuel Pressure Regulator Kit for correct calibration. Includes detailed installation instructions.

Applications: 215/255/260 Sea-Doo Models.
MSRP: $ 1,699.95
Additional information

Sea-Doo XX Charger

Riva Racing’s new XX-Charger delivers 14.5 psi of boost pressure at 8,500rpm producing arm wrenching acceleration and increased top speed. High performance impeller, spacer and front housing combo increase horsepower through superior Vortech impeller blade design and larger interior housing volume. Impeller features a sophisticated blade design that is precision balanced to deliver smooth operation. Housing, spacer and impeller install quickly and easily onto stock supercharger base plate.

XX Charger requires RIVA Pro-Series ECU, RIVA Pro-Series Fuel Injectors (50lb) & RIVA Fuel Pressure Regulator Kit for correct calibration. Includes detailed installation instructions.

Applications: 255/260 Sea-Doo Models
MSRP: $ 699.95
Additional information

FX-SHO/FZ Boost Clamp

Riva Racing’s Boost Clamp will allow you to run up to 17psi of boost pressure in your Yamaha SHO engine when used with RIVA Fuel Pressure Regulator Kit and stock ECU. Device controls communication between stock MAP sensor and stock ECU to allow for higher boost levels and more power. The Boost Clamp is an integral part of RIVA Stage 2 SHO Engine Kit producing 260hp when combined with our recommended components. Installs quickly & easily with integrated waterproof connectors.

MSRP: $199.95 (Boost Clamp; YAM FX-SHO/FZ)
MSRP: $ 474.95 (Fuel Pressure Regulator Kit, Rising Rate; YAM FX-SHO/FZ)
Additional information

FX-SHO/FZ Stage 2 Engine Kit

The Stage II Engine Kit produces 260 horsepower @ 7,600rpm utilizing stock ECU and fuel injectors. Kit delivers major acceleration and top speed and runs reliably on 91-93 octane pump fuel. Installs easily and requires no internal engine modifications.

Complete Stage II Kit includes: Performance Power Filter Kit, E1 Supercharger Impeller, OEM Intercooler Upgrade Kit, Performance Blow-off Valve Kit, Intake Manifold Upgrade Kit, Fuel Pressure Regulator Kit, Boost Clamp, Free Flow Exhaust Kit, Engine Cooling Upgrade Kit, and Engine Breather Upgrade Kit.

MSRP: $ 2,437.00
Additional information

Yamaha Race Cam Set

The Yamaha Race Cam Set adds 15 peak horsepower and increased torque throughout the rpm range. The set requires RIVA Stage III modifications with appropriate ECU calibration.These racing intake and exhaust cams utilize your OEM camshaft sprockets and mounting hardware.

For those running RIVA/Vi-PEC ECU, Riva offers specific maps to complement increased power provided by these Racing Cams.

MSRP: $799.95 (Cams, 628 Power; YAM FX-SHO/FZ )
MSRP: $724.95 (Upgrade Kit, Valve Train; YAM 1.8L Engine)
Additional information

H1 Race Charger Impeller & Housing

The H1 Race Charger was designed for serious racers and tuners who demand the ultimate performance gains. H1 Impeller and housing combo delivers 20psi of boost pressure at 8,500rpm producing up to 400hp on modified engines. High performance impeller and housing combo increase horsepower through superior blade design and larger interior housing volume. Impeller features a sophisticated HKS blade design that is precision balanced for smooth operation. Requires aftermarket ECU and upgraded engine components for proper calibration and durability.

Performance Data:
    * 16.5psi @ 7,500rpm
    * 17psi @ 7,700rpm
    * 18psi @ 8,000rpm
    * 20psi @ 8,500rpm

MSRP: $749.95 (Impeller & Housing, H1 Race Charger – YAM FX-SHO/FZ)
Additional information