1
Did you find this review useful?
2007 Sea-Doo 3D™ DI
2007 Sea-Doo 3D™ DI pictures, prices, information, and specifications.
Below is the information on the 2007 Sea-Doo 3D™ DI. If you would like to
get a quote on a new 2007 Sea-Doo 3D™ DI use our
Build Your Own tool,
or Compare
this PWC to other 1-Passenger Seated PWCs.
2007 Sea-Doo 3D™ DI Specifications
| Identification | |
|---|---|
| Model Type | 1-Passenger Seated |
| BASE MSRP(US) | $8,299.00 |
| Dealers | Sea-Doo Dealers |
| Warranty | 12 |
| Insurance |
|
| Engine: | |
| Engine Brand Name | 4-TEC™ Rotax™ |
| Engine Type | In-line |
| Cylinders | 2 |
| Engine Stroke | 4-Stroke |
| Horsepower (bhp/kW) | 130 / 97 |
| Cooling | Water (Open Loop) |
| Valves | 12 |
| Valves Per Cylinder | 4 |
| Valve Configuration | SOHC |
| Bore (mm/in) | 88 / 3.47 |
| Stroke (mm/in) | 78.2 / 3.08 |
| Displacement (cc/ci) | 951 / 58 |
| Compression Ratio | 6.0:1 |
| Starter | Electric |
| Fuel Requirements | Regular |
| Fuel Type | Gas |
| Turbocharged | No |
| Supercharged | No |
| Fuel Injector | Yes |
| Fuel Injector Size (mm) | 52 |
| Carburetor | No |
| Carburetion Type | Fuel Injected |
| Speed Governor | No |
| Kill Switch / Tether Cord | Standard |
| Emergency Engine Shut-Off | Standard |
| Sound Reduction Brand | D-Sea-BeI™ System |
| Transmission: | |
| Transmission Type | Direct Drive |
| Reverse | No |
| Throttle Type | Thumb |
| Steering: | |
| Steering Brand | Off-Throttle Assisted Steering™ (OTS) |
| Steering Type | Manual |
| Steering Assist System | Yes |
| Steering Control | Handlepole |
| Tilt Steering | Standard |
| Technical Specifications: | |
| Length (ft) | 8.92 |
| Width (in/mm) | 44 / 1117.6 |
| Height (in/mm) | 36.3 / 922 |
| Length (ft/ft) | 8 |
| Length (ft/in) | 11.1 |
| Dry Weight (lbs/kg) | 610.7 / 277 |
| Fuel Capacity (gal/l) | 9.2 / 35 |
| Storage Capacity (cuft/gal/l) | 0.2 / 1.4 / 5.4 |
| Engine Displacement to Weight (cc) | 1.56 |
| Seats: | |
| Seat Type | One-Piece |
| Adjustable | Yes |
| Seat Material | Vinyl |
| Seat Location | Driver |
| Number Of Seats | 1 |
| Stand-Up Ride | Standard |
| Exterior: | |
| Body Material | Fiberglass Reinforced Composite (FRC) |
| Hull Material | Fiberglass Reinforced Composite (FRC) |
| Hull Type | Semi V |
| Floor Board Location | Driver |
| Skid Resistant | Yes |
| Hand Grips | Standard |
| Handlebars | Standard |
| Adjustable | No |
| Docking Protection | Standard |
| Instrumentation: | |
| Digital Instrumentation | Standard |
| Temperature Warning Type | Light |
| Fuel Level Warning Type | Light |
| Service Reminder | Standard |
| Pricing: | |
| Warranty (Months/Condition) | 12 / Limited |
| Identification: | |
| Generic Type (Primary) | 1-Passenger Seated |
| Manufacturer Country | Canada |
| Introduction Year | 2006 |
| Parent Company | Can-Am™ |
| Display Name | 3D™ DI |
| Towing & Hauling: | |
| Tow Hook | Standard |
| Drive Line: | |
| Jet Pump Type | Axial Flow |
| Jet Pump Material | Aluminum |
| Jet Pump Diameter (in/mm) | 6.1 / 155.5 |
| Impeller Material | Stainless Steel |
| Number Of Blades | 3 |
| Trim System Brand | Variable Trim System (VTS™ ) |
| Trim System Type | Manual |
| Convenience: | |
| Engine Immobilizer Brand | Digitally Encoded Security System™ (DESS) |
| Adjustable Handlebars | Standard |
| Bilge System Type | Automatic Siphon |
| Storage: | |
| Front Storage Well | Standard |
| Paint & Finish: | |
| Paint | Standard |
| Decal Kit | Standard |
User Reviews
Seadoo 3D Di
By Anders(Owner), Aug. 31, 2014
A bit wobbly at the sides in low speed if... Read Full Review
- 1-1 of 1 Reviews
Your Privacy Choices